Remote Keyless Entry (RKE) - Programming Cancellation

The receiver will cancel the programming sequence if any of the following conditions occur:
^ The program mode is exited through the DIC.
^ The ignition is turned to OFF.
^ The three transmitters have been programmed.
^ The RFA system has been in the program mode for longer than 2 minutes and no transmitters have been learned.

If the program mode is cancelled with less than three codes stored, the receiver will only accept the codes just stored. If the program mode is cancelled before any code is stored, the codes still remain valid.

The receiver retains all current access codes in memory if either of the following conditions occur:
^ A programming sequence is interrupted.
^ The battery is disconnected.