Wiper Motor Replacement
REMOVAL PROCEDURE1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Remove the wiper motor module.
4. Remove the wiper motor crank arm.
5. Remove the wiper motor screws.
6. Remove the wiper motor from the wiper motor module.
7. Remove the wiper motor splash shield from the wiper motor.
INSTALLATION PROCEDURE
1. Install the wiper motor splash shield to the wiper motor.
2. Position the wiper motor to the wiper motor module.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the wiper motor screws.
Tighten
Tighten the screws to 10 N.m (89 lb in).
4. Install the wiper motor crank arm.
5. Install the wiper motor module.
6. Install the air inlet grille panel.
7. Install the wiper arms.
8. Inspect the wipers for proper operation.