Audible Warning Device Control Module: Service and Repair

MULTIFUNCTION ALARM MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the instrument panel driver knee bolster panel.
2. Disconnect the multi-function audio alarm module (2) from the retainer on the left inside knee bolster bracket (4).
3. Disconnect the electrical connector (3) from the multi-function audio alarm module (2).
4. Remove the multi-function audio alarm module (2) from the vehicle.

INSTALLATION PROCEDURE




1. Install the multi-function audio alarm module (2) to the vehicle.
2. Connect the electrical connector (3) to the multi-function audio alarm module (2).
3. Connect the multi-function audio alarm module (2) to the retainer (4) on the left inside knee bolster bracket.
4. Install the instrument panel driver knee bolster panel.