Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Motor Resistor Assembly Replacement

REMOVAL PROCEDURE
The blower motor relay is an integral part of the blower motor resistor and cannot be serviced separately from the resistor.




1. Disconnect the electrical connectors from the blower motor resistor assembly (2) and the blower motor.
2. Remove the retaining screws (1) from the blower motor case (3).
3. Remove the blower motor resistor assembly (2) from the blower motor case (3).

INSTALLATION PROCEDURE




1. Install the blower motor resistor assembly (2) to the blower motor case (3).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the retaining screws (1) to the blower motor case (3).

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Connect the electrical connectors to the blower motor resistor assembly (2) and the blower motor.