Daytime Running Lamp Control Unit: Service and Repair

DAYTIME RUNNING LIGHTS (DRL) CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE

IMPORTANT: The daytime running light (DRL) module is on the left knee bolster bracket to the left of the steering column. You can reach the module from under the steering column.




1. Remove the instrument panel driver knee bolster panel.
2. Disconnect the electrical connector from the DRL module.
3. Remove the DRL module (4) from the left outside knee bolster bracket (1).

INSTALLATION PROCEDURE




1. Install the DRL module (4) to the left outside knee bolster bracket (1).
2. Connect the electrical connector to the DRL module.
3. Install the instrument panel driver knee bolster panel.