Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2002 >> Express 1/2 Ton Van V8-5.7L VIN R >> Repair and Diagnosis >> Heating and Air Conditioning >> Compressor HVAC >> Compressor Clutch Hub >> Service and Repair >> Compressor Clutch Plate and Hub Assembly Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Compressor Clutch Plate and Hub Assembly Removal

TOOLS REQUIRED
^ J 34992 Compressor Holding Fixture
^ J 33013-B Hub and Drive Plate Remover/Installer




1. Clamp the J 34992 in a vise.
2. Use thumb screws in order to attach the compressor to the holding fixture.

NOTE: Do not drive or pound on the clutch hub or shaft. Internal damage to the compressor may result. The forcing tip on the J 33013-B remover/installer center screw must be flat or the end of the shaft/axial plate assembly will be damaged.

3. Ensure that the center screw forces the tip to thrust against the end of the shaft.
4. Thread the J 33013-B into the hub.
5. While holding the body of J 33013-B of the remover with a wrench, turn the center screw into the remover body in order to remove the clutch plate and hub assembly (1).
6. Remove the shaft key. Retain the shaft key for reassembly.
pro multis · About Operation CHARM