A/C Belt
A/C Compressor Drive BeltRemoval Procedure
1. Loosen the A/C compressor mounting bolts.
2. Pivot the A/C compressor towards the engine in order to relieve the tension on the belt.
3. Remove the A/C compressor drive belt (1) from the pulleys.
Installation Procedure
1. Properly route and install the A/C compressor drive belt (1) on the A/C compressor, the power steering (if equipped), and the crankshaft pulleys.
Notice: Refer to Fastener Notice in Service Precautions.
2. Adjust the A/C compressor drive belt to obtain 9 mm (0.24 - 0.35 inch) deflection.
- Tighten the A/C compressor mounting bolts to 18 - 28 Nm (13 - 20 ft. lbs.).