Crankshaft, Engine

Lower Crankcase Bolts
First Pass 19 Nm (14 ft. lbs.)
Second Pass - Final Torque 27 Nm (20 ft. lbs.)

Main Bearing Cap Bolts
First Pass 42 Nm (31 ft. lbs.)
Second Pass - Final Torque 58 Nm (42 ft. lbs.)

Crankshaft
Journal Taper 0.01 mm (0.0004 inch)
Journal Out-of-Round 0.01 mm (0.0004 inch)
Runout at Center Journal 0.06 mm (0.0023 inch)
Thrust Bearing Thickness-Standard 2.500 mm (0.0984 inch)
Thrust Bearing Thickness - 0.125 mm (0.0049 inch) Oversize 2.563 mm
(0.1009 inch)
Thrust Play-Standard 0.11 -0.31 mm (0.0044-0.0122 inch)
Thrust Play-Maximum 0.38 mm (0.0149 inch)
Reground Journal Finished Diameter 64.732-64.750 mm
(2.5485-2.5492 inch)