Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2002 >> TrailBlazer 2WD L6-4.2L VIN S >> Repair and Diagnosis >> Restraints and Safety Systems >> Head Restraint System >> Head Rest >> Service and Repair >> Procedures >> Head Restraint Guide Assembly Replacement - Rear No. 2
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Head Restraint Guide Assembly Replacement - Rear No. 2

REMOVAL PROCEDURE




1. Remove the head restraint assembly.
2. Remove the seat back cover and pad to expose the seat back frame.
3. Gently pull the pad away from the seat back frame. It may be glued in places from its original assembly.
4. Remove the head rest restraint guides by squeezing the tabs on the bottom of the guide together and pulling the guide upward out of the seat.

INSTALLATION PROCEDURE




1. Install the head restraint guides by pushing them through the cover into the frame until the locking tabs snap into place. The guide with the locking tab (1) installs on the right hand side of the seat.
2. Install the seat back cover and pad on the seat back frame.
3. Install the head restraint assembly.
pro multis · About Operation CHARM