Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2002 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Alignment >> Ride/Trim Height Specifications
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ride/Trim Height Specifications

Standard Wheel Base (Vin U) Vehicles with 205/70R15 Tires D 5.23-6.02 in.
J 8.97-9.76 in.
Control mounting bolt, J measurement taken (24 in) from the centerline of the front wheel
K 9.84-10.62 in.
K measurement taken 560mm (22 in ) from the centerline of the rear wheel.
Z 2.28-3.07 in.
Z= Control arm mounting bolt to lowest point of frame
Vehicles with 215/70R15 Tires D 5.23-6.02 in.
J 9.25-10.03 in.
Control arm mounting bolt, J measurement taken (24 in) from the centerline of the front wheel.
K 10.15-10.94 in.
K measurement taken (22 in) from the centerline of the rear wheel.
Z 2.28-3.07 in.
Z= Control arm mounting bolt to lowest point of frame.
Extended Wheel Base (Vin X) Non Cargo Van D 5.47-6.25 in.
J 9.21-10.00 in.
Control arm mounting bolt, J measurement taken (24 in.) from the centerline of the front wheel.
K 10.07-10.86 in.
K measurement taken (22 in.) from the centerline of the rear wheel.
Z 2.28-3.07 in.
Z= Control arm mounting bolt to lowest point of frame.
Cargo Van (Z10) with Automatic
level control (G67)		D 5.78-6.57 in.
J 9.29-10.07 in.
Control mounting bolt, J measurement taken (24 in.) from the centerline of the front wheel.
K 10.35-11.14 in.
K measurement taken (22 in.) from the centerline of the rear wheel.
Z 2.28-3.07 in.
Z= Control arm mounting bolt to lowest point frame.
Cargo Van (Z10) without Automatic
level control (G67)		D 6.53-7.32 in.
J 9.44-10.23 in.
Control arm mounting bolt, J measurement taken (24 in.) from the centerline of the front wheel.
K 10.98-11.77 in.
K measurement taken (22 in.) from the centerline of the rear wheel.
Z 2.28-3.07 in.
Z = Control arm mounting bolt to lowest point of frame.
pro multis · About Operation CHARM