Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2003 >> Astro Van AWD V6-4.3L VIN X >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Seat Riser Trim Cover Replacement - Power
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Riser Trim Cover Replacement - Power



Seat Riser Trim Cover Replacement - Power

Removal Procedure





1. Remove the screws from the seat riser trim cover.
2. Remove the seat bolts from the seat to riser.
3. Remove the side trim covers from the seat riser.
4. Remove the screws that retain the power seat trim plate to the cover.
5. Disconnect the power seat switch electrical connector.
6. Remove the power seat switch from the trim plate by snapping the switch out.



Installation Procedure

1. Install the power seat switch to the trim plate by snapping the switch into place.
2. Connect the power seat switch electrical connector.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screws that retain the power seat trim plate to the cover.

Tighten the screws that retain the power seat trim plate to the cover to 2 N.m (18 lb in).

4. Install the seat bolts to the seat riser.

Tighten the riser to seat retaining bolts to 30 N.m (22 lb ft).

5. Install the seat riser trim cover.
6. Install the screws to seat riser trim cover.

Tighten the screws to seat riser trim cover to 2 N.m (18 lb in).



pro multis · About Operation CHARM