Flex Plate

Important: "Engine Side" stamped on the flywheel is to be positioned toward the engine.





Tighten the fasteners following a criss cross pattern.

Tighten the engine flywheel bolts to
. 40 Nm (30 lb ft) for the first pass.
Tighten the engine flywheel bolts to
. 80 Nm (59 lb ft) for the second pass.
Tighten the engine flywheel bolts to
. 100 Nm (74 lb ft) for the final pass.

4L60-E/4L65-E

Flywheel to Torque Converter Bolt 63 Nm (46 lb ft)

4L80-E/4L85-E

Flywheel to Converter 43 Nm (32 lb ft)