Scan Tool Data Definitions - ALC
SCAN TOOL DATA DEFINITIONSCompressor Signal: Indicates when the compressor relay is activated.
Controller Battery Volts: Range 10.0 V - 16.0 V. This data refers to the battery system voltage as measured by the suspension control module.
Exhaust Signal: Indicates when the exhaust solenoid is commanded on or off.
Left Rear Position Sensor: Range 0.5 V - 4.85 V. This data refers to vehicle height measured in volts.
Rear Leveling Air Press: Indicates the system pressure in psi.
Rear Leveling Air Press: Indicates the system pressure in volts.
Right Rear Position Sensor: Range 0.5 V - 4.85 V. This data refers to vehicle height measured in volts.
Sensor Supply Voltage: Indicates the voltage being supplied to the sensors from the suspension control module.
Vehicle Speed: The speed of the vehicle.