Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Trim Plate Replacement - Console

TRIM PLATE REPLACEMENT - CONSOLE

REMOVAL PROCEDURE




1. Disable the SIR system.
2. Remove the instrument panel (I/P) trim pad.
3. Remove the screws (1) from the I/P accessory trim plate (3).
4. Remove the I/P trim plate (3). Pull rearward in order to disengage the retainers (2).
5. Disconnect the electrical connectors for the headlamp dimmer switch.
6. Disconnect the electrical connector for the cigar lighter, if equipped.

INSTALLATION PROCEDURE




1. Connect the electrical connector for the cigar lighter, if equipped.
2. Connect the electrical connectors for the headlamp dimmer switch.
3. Align the retaining tabs (2) with the I/P carrier.
4. Install the I/P trim plate (3). Press the plate into the I/P carrier to engage the retainers (2).
5. Install the screws (1) to the I/P trim plate (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 2.3 N.m (20 lb in).

6. Install the I/P trim pad.
7. Enable the SIR system.