Cabin Ventilation Duct: Service and Repair

Pressure Relief Valve Replacement

Removal Procedure

1. Remove the rear bumper fascia.
2. Pull back the rear compartment trim from the right rear corner in order to expose the quarter outer panel pressure relief valve.




3. Remove the quarter outer panel pressure relief valve (1).
Disengage the tabs from the inside of the rear compartment.

Installation Procedure




1. Install the pressure relief valve (1) by sliding the valve into the opening and engaging the tabs.
Fully engage the retaining tabs.
2. Install the rear compartment trim.
3. Install the rear bumper fascia.