Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Scan Tool Data Definitions

Scan Tool Data Definitions
Ignition Voltage: The scan tool displays 0 - 17 volts. The amount of ignition voltage at the EBCM.
Left Front Wheel Speed: The scan tool displays 0 - 255 km/h (0 - 159 mph). The actual speed of the left front wheel.
Left Rear Wheel Speed: The scan tool displays 0 - 255 km/h (0 - 159 mph). The actual speed of the left rear wheel.
Right Front Wheel Speed: The scan tool displays 0 - 255 km/h (0 - 159 mph). The actual speed of the right front wheel.
Right Rear Wheel Speed: The scan tool displays 0 - 255 km/h (0 - 159 mph). The actual speed of the right rear wheel.
Switched System Battery Voltage: The scan tool 0 - 17 volts. The level of internal EBCM voltage available to the VES actuator when the ABS relay is energized.
VES Commanded Current: The scan tool displays -2.00 to 3.00 amps. The amount of current the EBCM is commanding to the VES actuator.
VES Failed: The scan tool displays Yes or No. Yes indicates a malfunction has been detected within the VES system. No indicates the VES system is operating to specification.
VES Feedback Current: The scan tool displays 2.00 to 3.00 amps. The absolute, or positive value of current returning from the VES actuator to the EBCM. Thus the - symbol is not displayed.
VES Indicator/Message: The scan tool indicates ON or Off. The state of the VES malfunction indicator or message, if equipped.