Lateral Accelerometer: Service and Repair

Lateral Accelerometer Replacement

Removal Procedure
1. Turn the ignition switch to the OFF position.
2. Remove the passenger seat.
3. Disconnect the lateral accelerometer connector.





4. Remove the two lateral accelerometer nuts (1).
5. Remove the lateral accelerometer (2).

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the lateral accelerometer (2).
Tighten the two lateral accelerometer nuts (1) to 3 Nm (24 inch lbs.).
2. Connect the lateral accelerometer connector.
3. Install the passenger seat.
4. Turn the ignition switch to the ON position, engine off.
5. Perform the Diagnostic System Check - ABS.