Seat Sensor/Switch: Service and Repair
INFLATABLE RESTRAINT SEAT POSITION SWITCH REPLACEMENTREMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Disconnect the electrical connector from the seat position switch.
3. Drill out the rivets that retain the seat position switch (1) to the seat adjuster track bracket.
CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
4. Remove the seat position switch from the seat adjuster track bracket.
INSTALLATION PROCEDURE
1. Install the seat position switch to the seat adjuster bracket
2. Install the rivets that retain the seat position switch (1) to the seat adjuster track bracket.
3. Connect the electrical connector to the seat position switch.
4. Install the passenger seat to the vehicle.