Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2003 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to vehicle Lifting.
3. Remove the right splash shield cover.
4. Remove the crankshaft balancer.




5. Disconnect the crankshaft position (CKP) sensor electrical connector.
6. Remove the CKP sensor shield (1).
7. Remove the CKP sensor bolts.

Crankshaft Position Sensor:




8. Remove the CKP sensor.

INSTALLATION PROCEDURE

Crankshaft Position Sensor:




1. Position the CKP sensor to the block.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the CKP sensor bolts.

Tighten
Tighten the bolts to 30 N.m (22 lb ft).





3. Install the CKP sensor shield (1).
4. Connect the CKP sensor electrical connector.
5. Install the crankshaft balancer.
6. Install the right splash shield cover.
7. Lower the vehicle.
8. Connect the negative battery cable.
9. Perform the Crankshaft Variation Learn Procedure. Programming and Relearning
pro multis · About Operation CHARM