Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2003 >> Impala V6-3.8L VIN K >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Relays and Modules - Ignition System >> Ignition Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Control Module: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the 14-way electrical connector from the ignition control module (ICM).
3. Disconnect the spark plug wires from the coil assemblies. Before removing the wires, note the position of the wires.




4. Remove the ignition coil screws (1).
5. Remove the ignition coils (2) from the ICM (3).
6. Remove the ignition control module (3) from the bracket.

INSTALLATION PROCEDURE




1. Install the ignition control module to the bracket.
2. Install the ignition coils (2) to the ignition control module (3).
3. Install the ignition coil screws (1).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screws to 4.5 N.m (40 lb in).

4. Connect the spark plug wires.
5. Connect the 14-way electrical connector to the module.

Tighten
Tighten the screw to 2.1 N.m (19 lb in).

6. Connect the negative battery cable.
pro multis · About Operation CHARM