Condenser HVAC: Service and Repair
CONDENSER REPLACEMENTTOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant
2. Remove the bolt from the compressor hose assembly to the condenser.
3. Remove the compressor hose assembly from the condenser.
4. Remove the evaporator hose assembly from the condenser.
5. Remove the radiator assembly.
6. Remove the condenser (2) from the radiator (1).
INSTALLATION PROCEDURE
1. Position the condenser (2) to the radiator (1). Install the condenser mounting bolts.
IMPORTANT: If replacing the condenser, add the refrigerant oil to the condenser. Refer to Refrigerant System Capacities for system capacity information.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 10 N.m (89 lb in).
2. Install the radiator assembly to the vehicle.
3. Refill the cooling system.
4. Install the compressor hose assembly to the condenser.
5. Install the evaporator hose assembly to the condenser.
6. Evacuate and charge the refrigerant system.