Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2003 >> S10/T10 P/U 2WD L4-2.2L VIN H >> Repair and Diagnosis >> Brakes and Traction Control >> Disc Brake System >> Service and Repair >> Disc Brake Hardware Replacement - Front (Dual Piston)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Disc Brake Hardware Replacement - Front (Dual Piston)

Disc Brake Hardware Replacement - Front (Dual Piston)

Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.





2. Remove the tire and wheel assembly.
3. Remove the front brake caliper.





4. Remove the front brake pads.
5. Remove the brake pad wear sensors.





6. Remove the bushings from the mounting bracket.
7. Lightly brush all brake pad contact areas.

Installation Procedure





1. Clean area using denatured alcohol.
2. Dry area using non-lubricated, filtered air.
3. Apply high temperature silicone brake lubricant to the brake caliper pin bolts. DO NOT apply lubricant to the brake pad hardware.





4. Install the bushings to the mounting bracket.





5. Install the brake pad wear sensors.
6. Install the brake pads.





7. Install the front brake caliper.
8. Install the tire and wheel assembly.
9. Lower the vehicle. Refer to Vehicle Lifting.
10. With the engine running, firmly pump the brake pedal three times.
pro multis · About Operation CHARM