Console Replacement - Pro

CONSOLE REPLACEMENT (PRO)

REMOVAL PROCEDURE
1. Remove the cupholder assembly.
2. Remove the console lid and bin assembly.




3. Remove the 6 console retaining bolts (1).
4. Lift up the console slightly in order to disconnect the wire connectors.
5. Remove the console from the bracket.

INSTALLATION PROCEDURE
1. Place the console on the bracket.
2. Connect all the wire connectors.




3. Install the 6 console retaining bolts (1) to the I/P extension.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the 6 retaining bolts to 1.6 N.m (14 lb in).

4. Install the console lid and bin assembly.
5. Install the cupholder assembly.