Arm Rest: Service and Repair

Armrest Replacement

Removal Procedure

1. Unzip the armrest trim and pull back to access the bolt.




2. Remove the bolt from the armrest.
3. Remove the armrest from the front bucket seat.



Installation Procedure





1. Position the bolt into the mounting point of the armrest.




2. Position the armrest to the front bucker seat.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Tighten the armrest mounting bolt.

Tighten the armrest mounting bolt to 4.5 N.m (40 lb in).

4. Zip up the armrest trim .
5. Inspect the armrest for proper movement.