Towing Hook / Bracket: Service and Repair

Tow Hook Replacement - Front (Chevrolet (X88) ONLY)

Removal Procedure

1. Remove the grille
2. Remove the front fascia.
3. Remove the front impact bar.
4. Place the impact bar on a clean, prepared surface.




5. Remove the bolt that retains the tow hook to the impact bar.
6. Remove the tow hook from the impact bar.

Installation Procedure




1. Install the tow hook to the impact bar, ensuring that the locating pin is properly indexed to the impact bar.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the bolt which retains the tow hook to the impact bar.

Tighten the bolt to 50 N.m (37 lb ft).

3. Install the impact bar.
4. Install the fascia.
5. Install the grille.