Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2003 >> Venture V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Crankshaft Position Sensor >> Service and Repair >> Crankshaft Position (CKP) Sensor Replacement (Sensor A)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position (CKP) Sensor Replacement (Sensor A)

REMOVAL PROCEDURE




1. Turn OFF the ignition.
2. Remove the serpentine drive belt from crankshaft pulley.
3. Raise the vehicle on hoist. Refer to Vehicle Lifting.
4. Remove the crankshaft harmonic balancer.
5. Note the routing of the CKP sensor harness before removal.
6. Remove the harness retaining clip (3) with the bolt (4).
7. Disconnect the CKP sensor electrical connector.
8. Remove the sensor bolts (4).
9. Remove the sensor.

INSTALLATION PROCEDURE




1. Install the 24X CKP sensor with the bolts (4) and route the harness as noted during removal.
2. Install the harness retaining clip (3) with the bolt (4).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the bolts to 10 N.m (89 lb in).

3. Connect the CKP sensor electrical connector.
4. Install the balancer on the crankshaft.
5. Lower the vehicle.
6. Install the serpentine drive belt.
7. Perform the CKP System Variation Learn Procedure. Programming and Relearning
pro multis · About Operation CHARM