Head Restraint Replacement With RPO Code YC7
HEAD RESTRAINT REPLACEMENT WITH RPO CODE YC7REMOVAL PROCEDURE
1. Raise the headrest.
2. If an assistant is available, proceed as follows:
2.1. Press the locking tabs on the headrest bushings in and down at a 45 degree angle in order to release them.
2.2. Have the assistant lift up on the headrest.
2.3. Remove the headrest.
3. If working alone, proceed as follows:
3.1. Using one hand, depress one locking tab.
Use the other hand to lift up on that side of the headrest.
3.2. While continuing to pull up on the headrest, depress the locking tab on the other side of the headrest bushing.
3.3. Remove the headrest from the seat back.
INSTALLATION PROCEDURE
1. Install the headrest to the seat back.
2. Push down on the headrest.
3. While continuing to press down on the headrest, depress the locking tab on the other side of the headrest bushing.
4. The locking tabs should click into place.