Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front

Wheel Speed Sensor Replacement - Front

Removal Procedure






1. Caution: Refer to Battery Disconnect Caution in Service Precautions.

Disconnect the negative battery cable.

2. Notice: Refer to Vehicle Lifting and Jacking Notice in Service Precautions.

Raise and suitably support the vehicle.
3. Disconnect the electrical connector from the front wheel speed sensor.
4. Remove the bolt and the front wheel speed sensor from the steering knuckle.

Installation Procedure






1. Notice: Refer to Fastener Notice in Service Precautions.

Install the bolt and front wheel speed sensor to the steering knuckle.
Tighten the bolt to 9 Nm (7 ft. lbs.).
2. Connect the electrical connector to the front wheel speed sensor.
3. Lower the vehicle.
4. Connect the negative battery cable.