Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2004 >> Blazer 2WD V6-4.3L VIN X >> Repair and Diagnosis >> Maintenance >> Filters >> Air Cleaner Housing >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Cleaner Housing: Service and Repair

AIR CLEANER ASSEMBLY REPLACEMENT

REMOVAL PROCEDURE




1. Loosen the clamp securing the mass air flow (MAF) sensor to the air cleaner housing cover.
2. Remove the MAF sensor from the air cleaner housing and position the sensor aside.




3. Remove the air cleaner housing mounting nut.




4. Remove the air cleaner housing by pulling upward until the mounting studs are free from the housing grommets.

INSTALLATION PROCEDURE




1. Install the air cleaner housing by pressing downward on the housing until the grommets are seated on the mounting studs.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the air cleaner housing mounting nut.

Tighten
Tighten the nut to 10 N.m (89 lb in).

NOTE: Refer to Mass Air Flow (MAF) Handling Notice in Service Precautions.




3. Insert the MAF sensor into the air cleaner housing cover.
4. Secure the air cleaner housing to the MAF sensor.

Tighten
Tighten the MAF sensor clamp to 4 N.m (35 lb in).
pro multis · About Operation CHARM