Procedures

LOCK CYLINDER REPLACEMENT - DOOR

REMOVAL PROCEDURE
1. Raise the window to the full UP position.
2. Remove the front door trim panel.
3. Remove the water deflector in order to access the lock cylinder.




4. Remove the lower window channel retainer (2).




5. Remove the lock cylinder retaining clip (1).
6. Remove the lock rod from the lock cylinder (3).
7. Remove the lock cylinder (3) from the door.

INSTALLATION PROCEDURE




1. Install the lock rod to the door lock cylinder (3).
2. Install the lock cylinder (3).
3. Install the lock cylinder retaining clip (1).




4. Install the lower window channel retainer (2).
5. Install the water deflector.
6. Install the door trim panel.