Lock Replacement - Rear Door

Lock Replacement - Rear Door

Removal Procedure

1. Remove the rear door water deflector.
2. Remove the rear door inside handle.
3. Disconnect the rear door lock electrical connectors.




4. Remove the rear door outside handle rods (1,2).




5. Remove the rear door lock screws (1, 2, 3).
6. Remove the rear door lock from the rear door.

Installation Procedure




1. Position the rear door lock into the rear door.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the rear door lock screws (1, 2, 3).

Tighten the screws to 10 N.m (89 lb in).




3. Install the rear door outside handle rods (1,2).
4. Connect the rear door lock electrical connectors.
5. Install the rear door inside handle.
6. Install the rear door water deflector.