Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2004 >> Corvette V8-5.7L VIN G >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Engine Lubrication >> Oil Level Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Oil Level Sensor: Service and Repair

Engine Oil Level Sensor and/or Switch Replacement

Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.





2. Remove the oil pan drain plug.
3. Completely drain the engine oil.
4. Disconnect the engine oil level sensor electrical connector.
5. Remove the engine oil level sensor.

Installation Procedure

Notice: Refer to Fastener Notice in Service Precautions.





1. Install the drain plug to the oil pan.
Tighten the drain plug to 25 Nm (18 ft. lbs.).
2. Install the engine oil level sensor.
Tighten the engine oil level sensor to 13 Nm (115 inch lbs.).
3. Connector the engine oil level sensor electrical connector.
4. Lower the vehicle.
5. Refill the engine with oil.
pro multis · About Operation CHARM