Side
INFLATABLE RESTRAINT SIDE IMPACT SENSOR REPLACEMENTREMOVAL PROCEDURE
1. Disable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8.
2. Remove the door trim panel.
3. Remove the fasteners securing the sensor to the vehicle and remove the sensor from the vehicle.
4. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Position the sensor to the vehicle and install the sensor fasteners.
Tighten
Tighten the fasteners to 9 N.m (80 lb in).
3. Install the door trim panel.
4. Enable the roof rail SIR system. Refer to SIR Disabling and Enabling Zone 8.