Rear Floor Console Replacement

Rear Floor Console Replacement

Removal Procedure

1. Position the front seat assemblies forward in order to get clearance to remove the rear floor console screws.
2. Raise the park brake lever in order to get clearance to remove the rear floor console.
3. Remove the 2 screws which secure the rear floor console. Lift the console.
4. Remove the 12-volt power supply, if equipped. Refer to 12-Volt Accessory Power Receptacle Replacement in Power Outlets.
5. Remove the rear floor console from the vehicle.

Installation Procedure

1. Install the 12-volt power supply. Refer to 12-Volt Accessory Power Receptacle Replacement in Power Outlets.
2. Install the rear floor console to the vehicle. Secure the console with the 2 screws.
3. Lower the park brake lever.
4. Position the front seat assemblies backward and in an upright position.