Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2004 >> Tracker 2WD V6-2.5L VIN 1 >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Canister Purge Control Valve >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Canister Purge Control Valve: Service and Repair

EVAPORATIVE EMISSION (EVAP) CANISTER PURGE VALVE REPLACEMENT

REMOVAL PROCEDURE

NOTE: The EVAP canister may have released carbon particles which caused this part to fail and may cause damage to other components. Check the EVAP canister for loose carbon before returning the vehicle to service.




1. Disconnect the two hoses (4) from the EVAP canister purge valve.
2. Disconnect the electrical connector (1) from the EVAP canister purge valve.
3. Remove the one fastener (3) from the EVAP canister purge valve (2).
4. Remove the EVAP canister purge valve (2) from the intake manifold.

INSTALLATION PROCEDURE




1. Install the EVAP canister purge valve (2) to the intake manifold.
2. Secure the EVAP canister purge valve (2) with the fastener (3).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the fastener to 10 N.m (89 lb in).

3. Connect the electrical connector (1) to the EVAP canister purge valve.
4. Connect the two hoses (4) to the EVAP canister purge valve.
pro multis · About Operation CHARM