Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Aveo L4-1.6L VIN 6 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Input Shaft Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Input Shaft Speed Sensor Replacement



Input Shaft Speed Sensor Replacement

Removal Procedure





Caution
Refer to Battery Disconnect Caution in Service Precautions.

1. Disconnect the negative battery cable.

2. Disconnect the input shaft speed (ISS) sensor electrical connector.





3. Remove the ISS sensor retaining bolt.
4. Remove the ISS sensor from the transaxle.

Installation Procedure





Important
Lubricate the O-ring with ISU DEXRON III.

1. Install a new O-ring on the ISS sensor.

2. Notice
Refer to Fastener Notice in Service Precautions.

Install the ISS sensor and retaining bolt into the transaxle case.
Tighten the ISS sensor retaining bolt to 5.4 Nm (48 inch lbs.).





3. Connect the ISS sensor electrical connector.
4. Connect the negative battery cable.
pro multis · About Operation CHARM