Vacuum Reservoir HVAC: Service and Repair
VACUUM TANK REPLACEMENTREMOVAL PROCEDURE
1. Remove the HVAC module assembly.
2. Remove the vacuum hose from the vacuum tank.
3. Remove the vacuum tank screw.
4. Remove the vacuum tank from the HVAC module assembly.Slide the mounting tab from the bracket.
INSTALLATION PROCEDURE
1. Install the vacuum tank to the HVAC module assembly.Slide the mounting tab into the bracket.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the vacuum tank screw.
Tighten the vacuum tank screw to 2 N.m (18 lb in).
3. Connect the vacuum tank hose.
4. Install the HVAC module assembly.