Skid Plate: Service and Repair

Skid Bar Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the front fascia.
3. Remove all related panels and components.
4. Support the radiator assembly.
5. Support the skid bar.




6. Remove the 4 bolts (1) attaching the skid bar to the frame rails.
7. Remove the skid bar.
8. Save all of the brackets, mounting studs, and accessories for transfer to the new skid bar.

Installation Procedure

1. Transfer all of the brackets, mounting studs, and accessories to the new skid bar.
2. Position the skid bar to the frame rails.






Notice: Refer to Fastener Notice in Service Precautions.

3. Install the 4 bolts (1) attaching the skid bar to the frame rails.

Tighten the bolts to 50 N.m (36 lb ft).

4. Install all related panels and components.
5. Install the front fascia.
6. Lower the vehicle.