Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Corvette V8-6.0L VIN U >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Gear Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Gear Sensor/Switch: Service and Repair



Backup Lamp Switch Replacement

Removal Procedure





1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the catalytic converter.
3. Disconnect the backup lamp switch electrical connector.





4. Remove the backup lamp switch.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the backup lamp switch.
^ Tighten the backup lamp switch to 20 Nm (15 ft. lbs.).





2. Connect the backup lamp switch electrical connector.
3. Install the catalytic converter.
4. Lower the vehicle.
pro multis · About Operation CHARM