Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Epica (CANADA) L6-2.5L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Wheel Speed Sensor >> Service and Repair >> Rear Wheel Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Wheel Speed Sensor Replacement




Rear Wheel Speed Sensor Replacement

Removal Procedure





Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.

2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair in General Information.

3. Disconnect the rear wheel speed sensor electrical connector.

4. Remove the rear hub unit from the knuckle assembly, because the wheel speed sensor is not serviceable separately. Refer to Rear Wheel Bearing and Hub Replacement Service and Repair in Rear Suspension.

Installation Procedure





Important:
The wheel speed sensor is served as an assembly, hub-wheel speed sensor. Therefore, the additional working procedure for air gap is not needed.


1. Install the rear hub unit. Refer to Rear Wheel Bearing and Hub Replacement Service and Repair in Rear Suspension.

2. Connect the rear wheel speed sensor electrical connector.

3. Lower the vehicle.

4. Connect the negative battery cable.

pro multis · About Operation CHARM