Brake Pad: Testing and Inspection
Brake Pad Inspection
Caution:
Refer to Vehicle Lifting Caution Vehicle Lifting Caution.
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle Service and Repair.
2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.
3. Inspect the brake pads for wear.
4. Measure the thickness.
* The minimum thickness of the inner or the outer front brake pad is 2 mm (0.08 inch).
* The minimum thickness of the inner or the outer rear brake pad is 2 mm (0.08 inch).
5. Install the brake pads in axle sets only.
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation Service and Repair.
7. Lower the vehicle.