Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Control Module HVAC: Service and Repair




Blower Motor Control Module Replacement

Removal Procedure





Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.

2. Remove the glove box lower panel cover. Refer to Instrument Panel Storage Compartment Replacement Service and Repair in Instrument Panel, Gauges, and Console.

3. Disconnect the electrical connector at the resistor.

4. Remove the screws from the resistor.

5. Remove the resistor from the A/C module by gently pulling the resistor downward.

Installation Procedure





Notice:
Refer to Fastener Notice Fastener Notice in Cautions and Notices.

1. Install the new resistor into the heater/air distributor case assembly with the screws.

Tighten the blower motor resistor screws to 6 Nm (53 lb in).

2. Connect the electrical connector at the resistor.

3. Connect the negative battery cable.

4. Confirm the proper performance of the blower.

5. Install the glove box lower panel cover. Refer to Instrument Panel Storage Compartment Replacement Service and Repair in Instrument Panel, Gauges, and Console.