Tail Lamp: Service and Repair
Tail Lamp Replacement
Removal Procedure
Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution.
1. Disconnect the negative battery cable.
2. Disconnect the electrical connectors.
3. Remove the nuts and the lamp assembly.
4. Remove any inoperative bulb.
Installation Procedure
1. Install the replacement bulbs.
Notice:
Refer to Fastener Notice Fastener Notice.
2. Install the lamp assembly with the nuts.
Tighten the rear combination lamp assembly nuts to 2 Nm (18 lb in).
3. Connect the electrical connectors.
4. Connect the negative battery cable.