Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fog/Driving Lamp Switch: Service and Repair



FOG LAMP SWITCH REPLACEMENT - FRONT

REMOVAL PROCEDURE




1. Remove the trim plate bezel from the instrument panel (I/P) cluster.
2. Remove the headlamp switch assembly screws.
3. Pull the headlamp switch assembly from the I/P.




4. Disconnect the electrical connector from the fog lamp switch.




5. Remove the fog lamp switch from the back of the headlamp switch assembly.

INSTALLATION PROCEDURE




1. Install the fog lamp switch through the back of the headlamp switch assembly by pressing the switch into place until fully seated.




2. Connect the electrical connector to the fog lamp switch.




3. Install the headlamp switch assembly to the I/P.
4. Install the headlamp switch assembly screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the screws to 2 N.m (18 lb in).

5. Install the trim plate bezel.