Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Malibu L4-2.2L VIN F >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Shift Linkage >> Service and Repair >> Shift Control Cable Replacement - Floor Shift
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Shift Control Cable Replacement - Floor Shift



Shift Control Cable Replacement - Floor Shift

Removal Procedure





1. Remove the console.
2. Press the tabs on the control cable and remove the cable from the control assembly.





3. Disconnect the control cable from the transaxle range switch lever.





4. Press the 2 tabs on the control cable and remove the cable from the control cable bracket.





5. Remove the control cable grommet from the dash panel.
6. Remove the control cable from the vehicle.

Installation Procedure





1. Guide the control cable through the pass-through in the dash panel.
2. Secure the control cable grommet by pressing the cable into the pass-through hole in the dash panel.





3. Install the control cable into the transmission bracket, push down until the tabs lock the cable to the bracket.





4. Install the cable to the transmission range switch lever by pressing down until the cable snaps into place.





5. Connect the control cable end to the control assembly lever.
6. Connect the control cable to the pin on the control assembly.
7. Secure the control cable into the control assembly by pushing into place.
8. Install the console.
9. Adjust the control cable assembly.
pro multis · About Operation CHARM