Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Coil: Service and Repair




Ignition Coil Replacement

Removal Procedure





Caution:
Refer to Battery Disconnect Caution Battery Disconnect Caution.

1. Disconnect the negative battery cable.

2. Disconnect the electronic ignition (EI) system ignition coil connector.

3. Note the ignition wire location and remove the ignition wires.

4. Remove the EI system ignition coil retaining bolts.

5. Remove the EI system ignition coil.

Installation Procedure





Notice:
Refer to Fastener Notice Fastener Notice.

1. Install the EI system ignition coil into the mounting location and install the retaining bolts.

Tighten the electronic ignition system ignition coil retaining bolts to 10 Nm (89 lb in).

2. Connect the EI system ignition coil connector.

3. Install the ignition wires.

4. Connect the negative battery cable.