Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> SSR V8-6.0L VIN H >> Repair and Diagnosis >> Body and Frame >> Seats >> Power Seat Switch >> Service and Repair >> Procedures >> Seat Switch Bezel Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seat Switch Bezel Replacement



SEAT SWITCH BEZEL REPLACEMENT

REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the seat cushion outer trim panel from the seat assembly.




3. Remove the 3 screws that retain the switch bezel to the seat.
4. Remove the seat switch from the switch bezel by releasing the retaining tabs
5. Remove the heated seat switch from the switch bezel by releasing the retaining tabs.
6. Remove the switch bezel from the seat .

INSTALLATION PROCEDURE
1. Install the heated seat switch to the switch bezel, verifying that the retaining tabs are fully seated.
2. Install the seat switch to the switch bezel, verifying that the retaining tabs are fully seated.




3. Install the switch bezel to the seat with the 3 screws.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the seat switch bezel screws to 1.5 N.m (13 lb in).

4. Install the seat cushion outer trim panel to the seat assembly.
5. Install the seat in the vehicle.
pro multis · About Operation CHARM