Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> SSR V8-6.0L VIN H >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair



CAMSHAFT POSITION (CMP) SENSOR REPLACEMENT

REMOVAL PROCEDURE




1. Remove the generator mounting bracket.
2. Remove the camshaft position sensor mounting bolts (1).
3. Remove the camshaft position sensor assembly (4, 5, 6) from the front cover assembly (7).
4. Disconnect the camshaft position sensor jumper harness (2) and the engine harness (3) electrical connectors.
5. Separate the camshaft sensor (5) and O-ring (6) from the jumper harness (4). Discard the O-ring and use NEW only.

INSTALLATION PROCEDURE




1. Apply a small amount of clean motor oil to the O-ring (6).
2. Install the NEW O-ring (6) on the camshaft sensor (5).
3. Reconnect camshaft sensor (5) and (6) to the jumper harness (4).
4. Reconnect the engine harness connector (3) to the jumper harness (2).
5. Install the camshaft sensor assembly (4, 5, 6) to the front cover (7).
6. Install the mounting bolts (1) for the camshaft sensor (5).

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten the mounting bolts (1) to 25 N.m (18 lb ft).

7. Install the generator mounting bracket.
pro multis · About Operation CHARM