Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2005 >> Silverado 1500 2WD V6-4.3L VIN X >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Generator Battery Control Module Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Generator Battery Control Module Replacement



GENERATOR BATTERY CONTROL MODULE REPLACEMENT

REMOVAL PROCEDURE




1. Disconnect the engine harness electrical connector from the generator battery control module.
2. Remove the negative battery cable.
3. Cut the tie straps and electrical tape attaching the generator battery control module to the battery cable.
4. Squeeze the negative battery cable branches together.
5. Slide the generator battery control module off of the negative battery cable.

IMPORTANT: Note the position of the generator battery control module prior to removal.

INSTALLATION PROCEDURE




1. Slide the NEW generator battery control module up onto the negative battery cable.

IMPORTANT: Ensure that the tape tab is pointing away from the generator battery control module prior to installation.

2. Using NEW tie straps and electrical tape, attach the generator battery control module to the negative battery cable.
3. Install the negative battery cable.
4. Connect the engine harness electrical connector to the generator battery control module.
5. Program the generator battery control module. Refer to Generator Battery Control Module Programming and Setup.
pro multis · About Operation CHARM