Operation CHARM: Car repair manuals for everyone.
Home >> Chevrolet >> 2006 >> Corvette V8-7.0L VIN E >> Repair and Diagnosis >> Wiper and Washer Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Scan Tool Data Definitions



SCAN TOOL DATA DEFINITIONS

Headlamp Wash Relay Cmd.: The scan tool displays On/Off. When the body control module (BCM) commands the headlamp washers on, the scan tool parameter displays the output to the headlamp wash relay as On.

Windshield Washer Fluid: The scan tool displays the status of the washer fluid level switch.

Windshield Washer Switch: The scan tool displays On/Off. When the windshield washer switch is pressed, the scan tool parameter will display the switch signal to the BCM as On.

Windshield Wiper Switch: The scan tool displays Off/Delay 1,2,3,4,5/Low/Mist/Hi. When the windshield wiper system is active, the scan tool will display the selected wiper; Delay 1,2,3,4,5, Low, Mist, or Hi mode.

Wiper Motor Relay Command: The scan tool displays On/Off. When the windshield wiper system is in the active state, the scan tool displays the BCM commanded output to the wiper relay as On.

Wiper Park Switch: The scan tool displays On/Off. The scan tool displays the state of the wiper park switch.
pro multis · About Operation CHARM